NJP-200 Fully Automatic Capsule Filling Machine
A. Introduction
NJP-200 automatic capsule filling machine is used for filling the capsule of powder and granular drugs. It adopts multi-bore dosing, intermittent motion and frequency conversion. It can automatically complete capsule feeding, separating, filling, (waste capsule rejecting), capsule closing, finished product discharging and die cleaning.
B. Main Features
The inner design turret has been updated, and it is equipped with the linear bearing from Japan directly, so that it can be made sure to have a longer usage-life and precision.
The working station cam runs under the right lubricating condition, increases the pressure spray pump, maintains the lubrication of cam slot, reduce wear, and longer the service life of spare parts.
It adopts computer controller, has frequency conversion, an easy operation and clear appearance can be done by digital display.
The multi-bore dosing, which ensure the high precision dosage (it is controlled around ±3.5%); if user use good capsule, the capsule qualified rate can achieve ≥99%). The machine is used both for Chinese traditional medicine and the Western medicine.
It is equipped with safe protection device and automatic shutdown against the lack of materials. It works steadily and reliably; it works the best for the hard capsule filling.
C. Main Technical Parameters
Model | NJP-200 |
|
Item |
Weight |
700kg |
Outline dim. |
720×680×1700mm |
|
Power of motor |
3.7kw |
|
Power supply |
AC 380V;50Hz |
|
Max.Production capacity |
200pcs/min |
|
Application capsule |
00#~5# |
|
Capsule feeding rate |
≥99.5% |
|
Noise |
≤75dBA |
|
Filling difference |
Above 300mg≤±3% |
|
Air comsuption |
0.06m3/min 0.3Mpa |
|
Dust collector |
160m³/h |
|
Water requirement |
Water ring vacuum pump with the use of water tanks, also can be connected with external sources |
|
Vacuum degree |
-0.02~-0.06 MPa |
|
Water flow |
500L/h, 0.2-0.1Mpa |
|
Inlet pipe diameter |
20mm |
|
Diameter of drain pipe |
27mm |
|
Working environment temperature |
21℃±3℃ |
|
Height requirement of room |
Manual feeding≥2.6m,Vacuum feeding≥2.8m |
|
Working environment relative humidity |
40~55% |
|
Exhaust quantity |
300m3/h |
|
Special function |
Can increase the micro pill filling device and processing powder collector function (filling part powder will be collected by another pipeline, don't need disinfection, sterilization, again directly into hopper filling) |
|
Control system |
Frequency convertor,PLC control |
|
Contact part |
304 stainless steel |
D. Configuration List of Machine
Description | Specification/Model NO |
Manufacturer |
Quantity |
Note |
Exactitude intermission graduator |
Ru83DS-10-150-2R-S2-V-SSS |
Shandong |
1 |
|
Main machine |
XDW1.1 |
Shanghai |
1 |
|
Vacuum pump |
SZ-0.2 |
Shanghai |
1 |
|
Cleaner |
1.1KW |
Zhejiang china |
1 |
|
Man-machine interface |
TK6070Hi |
WEINVIEW |
1 |
|
PLC |
VFD015B21A |
AirTAC |
1 |
|
Transducer |
DVP14E |
AirTAC |
1 |
|
Light axis |
DKNΦ20-25 |
Japan |
1 |
|
Beeline axletree |
SDE25Y |
Japan |
4 |
|
Beeline axletree |
SDE20Y |
Japan |
8 |
|
Beeline axletree |
SDE13Y |
Japan |
10 |
|
Beeline axletree |
SDE12Y |
Japan |
8 |
|
Beeline axletree |
SDE10Y |
Japan |
10 |
|
Roll-pin axletree |
IKDCF18 |
Japan |
1 |
|
Hot relay |
3UA59 |
China |
3 |
|
Relay |
3TB43 |
China |
1 |
|
Relay |
3TB41 |
China |
3 |
|
Breaker |
5SJ63-25 |
China |
1 |
|
Breaker |
5SJ61-6 |
China |
1 |
|
Sensor |
LJC30A-H-Z/AB2 |
Shanghai |
1 |
Optional:
1.Vacuum powder feeder 2.Automatic capsule feeder
3.Micro pill, granule filling device
NJP-200 Fully Automatic Capsule Filling Machine.pdf
NJP-400 Fully Automatic Capsule Filling Machine.pdf
NJP-600 Fully Automatic Capsule Filling Machine.pdf
NJP-800 Fully Automatic Capsule Filling Machine.pdf
NJP-1000 Fully Automatic Capsule Filling Machine.pdf
NJP-1200 Fully Automatic Capsule Filling Machine.pdf
NJP-2000 Fully Automatic Capsule Filling Machine.pdf
NJP-2500 Fully Automatic Capsule Filling Machine.pdf
NJP-3200 Fully Automatic Capsule Filling Machine.pdf
NJP-3500 Fully Automatic Capsule Filling Machine.pdf
NJP-3800 Fully Automatic Capsule Filling Machine.pdf
MAIN
Control Panel
Upper And Lower Module
Motor
Certificate
How to contact us?
①web:www.richpacking020.com
②Facebook:sales4@richpacking.cn
③skype:sales4@richpacking.cn
④86-20-89625260
⑤email:sales4@richpacking.cn
⑥address:RM.2215,NO.268 Zhongxin Building,Baogang Road Haizhu District,Guangzhou, Guangdong China
Our services
1. Solution
We will provide the customized resolves for you.
2.Track the cargo
Arrange the shipment in advance.
3.Spare part replacement
Provide the good price for all spare part replacement.
4. Reply Timely
Within 12 hours
5.warranty
One year warranty.
6.Teaching
Provide remote maintenance teaching for you.
7.Regular After-sales Service
Regularly contact our customer after-sales.
8. Repair
If you need engineer to repair the machine,we can provide for you.
If you are searching for competitive price and high quality thp flower-basket type tablet press machine, Rich Machinery must be your best choice. As one of the leading suppliers in China, we adheres to the spirit of innovation, and every product is combined with up-to-date technology. Please rest assured to wholesale quality and competitive price equipment with us.